Price includes GST and is freight free within North Island and South Island of New Zealand

Approx 250 mm X 115 mm

Commonly used in 1st stage of filtration to remove larger sediment, rust and scale.

Maximum Flow rate – 94 litres per minute

Polyester Pleated cartridges offer practical filtration with the convenience of a cartridge filter and the economy of cleanabilty. High surface area pleated construction means longer run length, high flow rates, high dirt holding ability and low pressure drop, giving the lowest cost per litre filtered. Once the cartridge gets dirty it can be cleaned under a tap or by gentle hosing. Severe cases can be soaked in dilute acid or other cleaner, appropriate to the deposits and then rinsed. Cartridges should be sterilised prior to reuse using bleach. Reusability means that the Polyester Pleated cartridges cost
less to use than disposable depth type cartridges as they can be cleaned several times before replacement is required (note: 0.35, 1 & 5 micron cartridges may only be cleanable once or
twice).
The cartridges are thermally bonded to provide integral joints between the pliable endcaps and rigid centre core for added strength and long service life. Pleated cartridges are particularly useful for low pressure applications such as domestic supplies using header tanks or roof water.