Anderson 357 Piston Pump
$7,342.75
Price includes GST and is freight free within metro areas of North Island and South Island of New Zealand only. Contact us for delivery charges to other areas including rural.
.
Recommended Oil EP90 (not included)
Excludes Motor
Includes Motor Pulley and Belt
Note: Manufacturer supplies these with Hard Valve Rubbers – if Soft Valve Rubbers are required, these are additional to the cost of the pump.
Description
Anderson 357 Piston Pump
Introducing the Anderson 357, tailored for those specific tasks where higher pressures are paramount, but with a compact volume in mind, the Anderson 357 is both robust and refined.
Engineered with a sleek 3″ motor pulley, this pump integrates Tulip cups and a sturdier Valve Rubber – ensuring it smoothly handles pressures beyond 100 psi. Delivering a flow rate of 1590 litres per hour (equivalent to 350 gallons), with a remarkable maximum head of 303 psi – that’s a soaring 700 ft or 213m in vertical lift terms.
What’s more, it’s optimized for a 1425 rpm electrical motor and runs seamlessly on SAE 90 oil. As for its suction, it has an impressive maximum lift of 7.5m (or 25 ft) on the suction side, coupled with a plunger cup size of 2 3/8″ (or 60mm). Choose Anderson 357 for a blend of power and precision.
We sell replacement piston pump parts for this model, if you would like to have a look at them please click here.
Crankcase
Cast iron totally enclosed type made in one casting and fully protecting gearing from grit. Crankcase end is accurately machined in one setting ensuring perfect alignment of all working parts.
Gearing
Driving pinion which is machine cut from S.G. castings is mounted on shaft running in ball-bearings and meshing with machine cut helical spur wheel bolted to eccentric sheave. Eccentric sheave and spur wheel, being separate parts, greatly facilitates maintenance.
Connecting Rod
Rugged construction with built in self lubrication.
Cylinder
One piece casting. Fitted with renewable brass liner.
Pump Valves
Special compound rubber and mounted on plate which can be removed without disturbing pipe work.
Plunger Rod
Corrosion resistant stainless steel
Duty
With exception of No. 402, all pumps are designed to pump cold or hot water at 93°C / 200 °F with 15 foot positive suction head i.e. flooded suction.
Have Questions?
Have a question or want to know more about this pump, or if it would suit your application? Be sure to contact us! We are happy to assist you.