Anderson 253 Piston Pump

Anderson 253 Piston Pump

$3,645.00

Price includes GST and is freight free within metro areas of North Island and South Island of New Zealand only. Contact us for delivery charges to other areas including rural.

.

Recommended Oil EP90 (not included)

Excludes Motor

Includes Motor Pulley and Belt

Note: Manufacturer supplies these with Hard Valve Rubbers – if Soft Valve Rubbers are required, these are additional to the cost of the pump.

SKU: AND253-1 Category:

Description

Anderson 253 Piston Pump

Introducing the Anderson 253, tailored for those specific tasks where higher pressures are paramount, but with a compact volume in mind, the Anderson 253 is both robust and refined.

Engineered with a sleek motor pulley, this pump integrates Tulip cups and a sturdier Valve Rubber – ensuring it smoothly handles pressures beyond 100 psi. Delivering a flow rate of 19 litres per minute (equivalent to 250 gallons per hour), with a remarkable maximum head of 130 psi – that’s a soaring 300 ft or 91m in vertical lift terms.

What’s more, it’s optimized for a 1425 rpm electrical motor and runs seamlessly on SAE 90 oil. As for its suction, it has an impressive maximum lift of 7.5m (or 25 ft) on the suction side, coupled with a plunger cup size of 1 3/8inch. Choose Anderson 253 for a blend of power and precision.

We sell replacement piston pump parts for this model, if you would like to have a look at them please click here.

Crankcase

Cast iron totally enclosed type made in one casting and fully protecting gearing from grit. Crankcase end is accurately machined in one setting ensuring perfect alignment of all working parts.

Gearing

Driving pinion which is machine cut from S.G. castings is mounted on shaft running in ball-bearings and meshing with machine cut helical spur wheel bolted to eccentric sheave. Eccentric sheave and spur wheel, being separate parts, greatly facilitates maintenance.

Connecting Rod

Rugged construction with built in self lubrication.

Cylinder

One piece casting. Fitted with renewable brass liner.

Pump Valves

Special compound rubber and mounted on plate which can be removed without disturbing pipe work.

Plunger Rod

Corrosion resistant stainless steel

Duty

With exception of No. 402, all pumps are designed to pump cold or hot water at 93°C /  200 °F with 15 foot positive suction head i.e. flooded suction.

Have Questions?

Have a question or want to know more about this pump, or if it would suit your application? Be sure to contact us! We are happy to assist you.

Please enable JavaScript in your browser to complete this form.